Suncast 7 X 7 Resin Outdoor Storage Shed

OUTDOOR STORAGE | Suncast® Corporation

Storage Shed Plans with Porch

Without a doubt a really useful addition to your garden is a garden
storage shed and by adding a porch you can really make an attractive
feature of it. My wife and I recently moved into a new house that had a
medium sized garden. I wanted a shed to store my gardening equipment
and decided to build my own from plan.

While deciding on the design my wife, a keen amateur gardener, said that she would also like it to double as a potting shed and whilst doing a search online we came across a good set of plans that included a porch.

Before building or buying anything it is important to check that your garden storage shed conforms to local building codes and if applicable you may need to consult with the tenants association. By having a good set of plans you can easily demonstrate to these interested parties what it is that you wish to achieve.

Your set of plans will enable you to order everything needed in one shopping trip instead of buying piecemeal. In my case I opted to have all my timber cut to size at the timber yard which in effect gave me a ready to go shed building kit.

Before putting everything together I had to decide on the foundation. As the shed was to be used for storage I decided on a hardcore base which was spread on a heavy polythene mat to stop rising damp. I laid five weather treated beams on top of the polythene and spread the hardcore between them leaving the beams 3 inches above ground level to support the shed and allow it to ‘breathe’.

With a little help from a good neighbour our storage shed complete with porch was built in just one weekend ready for the wife to paint during the week.

By adding a porch to our storage shed we have a potting shed workshop that is not an eyesore in the garden but actually an asset to our property. We are extremely pleased with the result, I have room to store the lawnmower, garden tools etc and I have fitted a workbench for the wife to do her magic with her flowers. On hot days she likes to work outside in the shade of the porch which now boasts two DIY rustic chairs – and I got those from the plans too!

Source: Free Articles from ArticlesFactory.com





Original Source: http://www.articlesfactory.com/articles/home-repair/storage-shed-plans-with-porch-build-a-garden-storage-shed-with-porch.html


Construction Types of Masonry Construction, Characteristics and Common Uses

Types of Masonry Construction, Characteristics And Common Uses

Virtually, all buildings incorporate some type of masonry construction, whether it is a stone or concrete foundation, brick veneer walls, or terra cotta ornamentation. Preservation of these buildings requires a basic understanding of masonry types and their characteristics, technology and construction methodology, proper maintenance and conservation treatments.

Masonry is generally a highly durable form of construction. However, the quality of material used, together with the quality of the mortar and workmanship can strongly affect the durability of the overall masonry construction. Masonry is commonly used for the walls of buildings, retaining walls and monuments. Brick is the most common type of masonry and may be either load bearing or a veneer. Concrete Masonry Units (CMU’s) are made from concrete and are larger than ordinary bricks. CMU walls can be reinforced by filling the block voids with concrete and steel reinforcing bars. Typically, not all voids are filled, but rather those at corners, wall ends, adjacent to window and door openings, which increase wall strength and stability. Placement of steel reinforcement generally results in a CMU walls having much greater lateral and tensile strength than unreinforced walls.

The earliest material to be used was stone. It can be obtained in two ways: from natural outcroppings or scattered deposits, and by the process of quarrying. Most early buildings were constructed of stone readily available near the building site. Early stonemasons also were aware that certain stone types had more “weatherability” – able to withstand the effects of weather better than others – and they utilized each type in accordance with its properties. Stones may be laid up in their natural form, or broken and squared, or shaped, for the proper fit with other stones in the wall.

Quarrying, the industrial process of extracting stone from the earth requires substantial effort and technology. In this process, stone is drilled, blasted, fractured or cut from the quarry face, and then shaped and finished for use in construction.

Concrete masonry units (block and concrete brick are available in sizes, shapes, colors, textures, and profiles for practically every conceivable need and convenience in masonry construction. In addition, concrete masonry units may be used to create attractive patterns and designs to produce an almost unlimited range of architectural treatments of wall surfaces. The following are some more prominent uses:

• Exterior load-bearing walls (below and above grade)

• Interior load-bearing or non load bearing walls

• Fire walls, party walls, curtain walls

• Partitions, panel walls, solar screens

• Backing for brick, stone, stucco, and other exterior facings

• Veneer or nonstructural facing for wood, concrete, or masonry

• Fire protection of structural steel members

• Firesafe enclosures of stairwells, elevator shafts, storage vaults, or fire hazardous work areas

• Piers, pilasters, columns

• Bond beams, lintels, sills

• Floor and roof systems

• Retaining walls, slope protection, ornamental garden walls, and highway sound barriers

• Chimneys and fireplaces

• Catch basins, manholes, valve vaults

• Paving and turf block

Solid brick masonry is made of two or more layers with the units running horizontally (called “stretcher” bricks) bound together with bricks running transverse to the wall (called “header” bricks). Each row of bricks is known as a course. The pattern of headers and stretchers employed gives to different bonds such as the common bond, with every sixth course composed of headers, the English bond, and the Flemish bond, with alternating stretcher and header bricks present on every course. There are no real significant utilitarian differences between most bonds, but the appearance of the finished walls is affected. Brickwork, like unreinforced concrete, has little tensile strength, and works by everything being kept in compression.

There are many brick laying patterns, the following are but a few:

Stack Bond The brick laying patterns described by this term are not structurally sound and are used only for decorative purposes. The stack bond is a run of stretchers with each stretcher stacked centered on the stretcher below it. All joints run vertically down the entire wall.

Running Bond brick laying patterns are a run of stretchers with each stretcher placed in the center of the stretcher below it. This pattern gives a reasonable amount of structural soundness.

English Bond is made up of alternating courses of stretchers and headers. This is the strongest bond for a one-brick thick wall.

Brick Terminology

Bat is a brick cut in half or quarter along the short face

Closer A queen closer is brick cut in half down the long face. They are used in corners of English or Flemish Bond.

Header Brick is laid in a wall, usually connecting two rows of a double wythe wall. The smallest end of the brick is horizontal, aligned with the surface of the wall and exposed to the weather.

Quoins are groups of brick that project slightly from the face of a wall at the corner of a building. The pattern often alternates with several courses projecting bricks, and several courses that are aligned with the wall. The pattern of projecting quoins often alternates with the brickwork on the other side of the corner.

Rowlock is a complete course of brick laid on its side, with the shortest end of the brick exposed and vertical. Commonly used on the top course as a coping for a garden wall.

Sailor Brick are laid on its end with the largest, broad face exposed.

Shiner Brick laid on edge like a sailor, but the broad face is set horizontally.

Soldier Brick often is a complete course of brick laid on end vertically, with the narrow side exposed in the face of the wall.

Wythe is a single vertical wall of brick.

Clay Brick vs. Concrete

The formula for brick making has not changed for hundreds of years. The primary ingredients are clays and shale. It is these ingredients that give natural brick its colors and hue.

The natural color of concrete is gray. In order to give concrete bricks color, additives are necessary to create the variety of colors. Weather and the ultraviolet rays of the sun can cause concrete bricks to fade over time.

Concrete bricks have a tendency to shrink. During the concrete curing process, if the bricks are not properly cured prior to being delivered to the jobsite, shrinking and cracking will appear at the mortar joints and can allow water to enter the wall cavity.

According to a recent survey of architects, designers, engineers, and environmental planners and managers conducted by the Portland Cement Association (PCA), 77 percent chose concrete as a sustainable material. Overall, respondents ranked concrete favorably for its energy efficiency, durability and reduced maintenance. Over 500 individuals participated in the blind survey presented in an Internet survey form by a third party web host.

According to PCA President, “buildings with exterior concrete walls utilize less energy to heat and cool than similarly insulated buildings with wood or steel frame walls”. Additionally, “the superior insulation, air tightness, and mass of the walls can reduce energy for heating and cooling by up to 40%.

Original Source: http://amazines.com/Construction/article_detail.cfm/1374317?articleid=1374317

Suncast 7 X 7 Resin Outdoor Storage Shed News:

Suncast 7.5 ft. x 7.5 ft. Resin Storage Shed-A01B02 at The Home Depot

Suncast – 7.5 ft. X 7.5 ft. Storage Building … GARAGES & OUTDOOR STORAGE ; Sheds ; More … Suncast 7.5 ft. x 7.5 ft. Resin Storage Shed.

Original Source: http://www.homedepot.com/p/Suncast-7-5-ft-x-7-5-ft-Resin-Storage-Shed-A01B02/100646682

STORAGE BUILDINGS > SHEDS > OUTDOOR STORAGE | Suncast® Corporation

Category: Storage Buildings, Manufacturer: Suncast Corporation … Cascade™ Blow Molded Resin Storage Shed View Product >

Original Source: http://www.suncast.com/outdoorstorage/sheds/storagebuildings.aspx

Suncast Alpine 7 ft. 5-3/4 in. x 10 ft. 8 in. Resin Storage Shed …

The Suncast Alpine 7 ft. 5-3/4 in. x 10 ft. 8 in. Resin Storage Shed … SHEDS, GARAGES & OUTDOOR STORAGE ; … it’s time for a Suncast Storage Building. These …

Original Source: http://www.homedepot.com/p/Suncast-Alpine-7-ft-5-3-4-in-x-10-ft-8-in-Resin-Storage-Shed-BMS8000/202024487

7 5 x 7 5 Backyard Garden Storage Shed Suncast | eBay

Find best value and selection for your 7 5 x 7 5 Backyard Garden Storage Shed Suncast search on … Suncast Sheds Alpine 7.5 x 7 Resin Storage Shed Kit w/ … Buy …

Original Source: http://www.ebay.com/sch/sis.html?_nkw=7+5+x+7+5+Backyard+Garden+Storage+Shed+Suncast+

Suncast Alpine 7 ft. 5-3/4 in. x 10 ft. 8 in. Resin Storage Shed …

The Suncast Alpine 7 ft. 5-3/4 in. x 10 ft. 8 in. Resin Storage Shed … SHEDS, GARAGES & OUTDOOR STORAGE ; … it’s time for a Suncast Storage Building. These …

Original Source: http://www.homedepot.com/p/Suncast-Alpine-7-ft-5-3-4-in-x-10-ft-8-in-Resin-Storage-Shed-BMS8000/202024487


How To Assemble Your Lifetime Storage Shed

Available at http://www.epicsheds.com – Do not consider this a manual as much as a showcase to how simple a Lifetime shed is to assemble. Lifetime sheds are …